Basic Operation - Alpine CVA-1006 Owner's Manual

PWR
(IVA-C801)
This section describes the basic operation of the radio. These operations also apply to the other
sources.
1
Press the PWR (Power) button on the unit to turn
the power on to the unit.
2
Press the OPEN/CLOSE button to open the
monitor. The unit beeps 3 times and raises the
monitor. The opening screen appears on the
monitor.
3
Press the SOURCE button. The display shows
the main menu screen.
4
Rotate the rotary encoder and select "RADIO"
from the main menu.
NOTE
• If a DVD player or DVD Changer is connected and its
power is on, the display shows " DVD or DVD-CHG ,
AUX2 " instead of " AUX1 AUX2 ."
• If both the DVD player and DVD Changer are
connected, the display shows " DVD " instead of
" AUX1 ", and " DVD-CHG " instead of " AUX2 ".
Selected Source
Volume Level
The Function Guide displays the labels for each of the Function buttons. These labels will
change depending upon the functions for the selected source.
OPEN/CLOSE
SOURCE Rotary encoder
Radio Mode Screen

Basic Operation

PWR OPEN/CLOSE
(CVA-1006)
5
Press the rotary encoder to execute the
selection. The Radio mode screen is displayed.
NOTE
If PAGE 1/2 or PAGE 1/3 appears in the Function Guide
menu, there are additional functions available for the
selected source. Access these functions by pressing the
FUNC button.
6
Press the SOURCE button again to select
another source.
(IVA-C801 screen)
SOURCE
Rotary encoder
Current Time
7
-EN