Radio Operation; Manual Tuning; Automatic Seek Tuning - Alpine CVA-1006 Owner's Manual

(IVA-C801)
1 2 3
BAND

Manual Tuning

1
Press the SOURCE button after turning on the
power.
The main menu screen appears.
2
Rotate the rotary encoder to scroll the bottom
menu and select "RADIO," then press the rotary
encoder.
The radio mode is activated and the display
changes to the Radio Mode screen.
3
Press the BAND button to select the desired
radio band. Each press changes the bands as
follows:
→ FM1 → FM2 → AM
4
Press the 2 (TUNE) button to choose the
manual tuning mode. Each press changes the
function modes for the buttons 1 and 3 as
follows:
→ Distance →
Local
g g f f g g
g f g g f f g g f g
5
Press the 1 (() or 3 ()) button to change
the radio frequency downward or upward
respectively. Each press changes the frequency
by one step. When the button is pressed and
held, the frequency changes continuously until
the button is released.
NOTE
When a stereo FM station is tuned in, the STEREO
indicator appears in the display.
Rotary encoder
SOURCE
→
Manual
f f ( ( ) )
f f ( ( ) ( ) )

Radio Operation

(CVA-1006)
1 2 3
BAND

Automatic Seek Tuning

1
Press the BAND button repeatedly to select the
desired radio band, FM or AM.
2
Press the 2 (TUNE) button to select the desired
mode, DX or Local. Each press changes as
follows:
→ →
Distance Local
There are two modes you can select for auto
tuning, DX and Local:
• DX (Distance) mode (with DX SEEK indicator
ON); Both strong and weak stations will be
tuned in.
• Local mode (with SEEK indicator ON);
Only strong stations will be tuned in.
The initial setting is DX.
3
Press the 1 (g) or 3 (f) button to
automatically seek a radio station downward or
upward respectively.
When the unit finds a station, it stops. To
automatically seek next station, press the same
button again.
NOTE
When a stereo FM station is tuned in, the STEREO
indicator appears in the display.
SOURCE
Rotary encoder
→
Manual
11
-EN