Radio Operation; Manual Tuning; Automatic Seek Tuning - Alpine CVA-1003 Owner's Manual

Radio Operation

Preset button number for
the stored station
The current setting status

Manual Tuning

1
Press the SOURCE button until a radio band and
frequency appears in the display.
2
Press the BAND button repeatedly until the
desired radio band is displayed.
Each press changes the band:
→ FM1 → FM2 → AM
3
Press the TUNE button repeatedly until "DX
SEEK" and "SEEK" disappear from the display.
NOTE
The initial mode is DX SEEK.
4
Press the g DN or f UP button to move
downward or upward one step respectively until
the desired station frequency is displayed.
NOTE
The STEREO indicator appears on the monitor display
when a Stereo FM station is tuned in.
10
-EN
A.ME/TUNE
BAND
SOURCE
g DN g g g g
f UP f f f f
Example of Radio Mode Screen
Volume Level
Preset buttons
(1 through 6)
Current Time

Automatic Seek Tuning

1
Press the SOURCE button until a radio band and
frequency appears in the display.
2
Press the BAND button repeatedly until the
desired radio band is displayed.
Each press changes the band:
→ FM1 → FM2 → AM
3
Press the TUNE button to illuminate the DX and
SEEK indicators in the display.
With the DX (Distance) mode activated, both
strong and weak stations will be tuned in the
Auto-Seek operation.
Press again to return to the local mode. The DX
indicator will turn off and the SEEK indicator will
remain illuminated. Now, only strong stations will
be tuned.
4
Press the g DN or f UP button to
automatically seek for a station downward or
upward respectively.
The unit will stop at the next station it finds.
Press the same button again to seek the next
station.
Selected Source
Frequency of the current
station