Citizen PPU-700 Command Reference Manual page 97

• Setting memory switch 2 (a = 2)
Bit b (Set Value)
1 49 (Default)
48
2
49 (Default)
48
3
49 (Default)
48
4
49 (Default)
48 (Default)
5
49
6 48 (Default)
7 48 (Default)
48 (Default)
8
49
• Setting memory switch 3 (a = 3)
Bit b (Set Value)
48 (Default)
1
49
48 (Default)
2
49
48 (Default)
3
49
48 (Default)
4
49
5 48 (Default)
6 48 (Default)
48 (Default)
7
49
48 (Default)
8
49
Reserved
Disables auto cutter.
Enables auto cutter.
Enables stored printing.
Disables stored printing.
Sets printing at full columns to be the same as CBM1000.
Sets printing at full columns to be the same as EPSON.
After cover close and PE recovery, prints as it is.
After cover close and PE recovery, prints from the
beginning using PAGE MODE, barcode, image,
double-height printing, etc. as a unit.
Reserved
Reserved
Enables PNE.
Disables PNE.
After clearing cutter error, can be restored by Feed SW.
After clearing cutter error, cannot be restored by Feed
SW.
When selecting cover open error as recoverable error,
recovered by cover close.
When selecting cover open error as recoverable error,
recovered by command.
Resets with parallel pin 31.
Does not reset with parallel pin 31.
Uses thermal paper.
Uses Black mark paper.
Reserved
Reserved
Sets PPU compatible mode.
Sets L90 compatible mode.
Sets cover open error during printing to be auto recovery
Sets cover open error during printing to be recoverable
error.
- 95 -
Function
Function