Citizen PPU-700 Command Reference Manual page 48

• When mapping a bit image (or downloaded bit image), if the print area is narrower
than the minimum width of the bit image (two dots for single density, or one dot for
double density), only the line for that image is handled as follows:
[Default] nL＝64、nH＝2
[See Also] GS
(2) If a sufficient area cannot be provided as a result of step (1), the print area is
extended toward the left (so, the left margin is decreased).
(2) The left margin is trimmed
(3) If a sufficient area cannot be provided as a result of step (2), the right spacing is
trimmed.
(1) The print area is extended toward the left (so, the left margin is decreased) until
it is equal to the minimum width of the image, but not wider than the printable
area.
L, GS P
Printable area
Left margin
Print area width
- 46 -
Ａ
(1) Extended
toward the right