Citizen PPU-700 Command Reference Manual page 183

(3) MSW3
• MSW 3-1: Recovery from Cutter Lock Error
Function: Selects the method of recovery from Cutter Lock error.
Resum Cttr Err
Operation at ON (1):
Recovers by a command.
After removing the cause of the error, returns by a command <DLE+ENQ+n>.
Operation at OFF (0):
Recovers by FEED SW.
After removing the cause of the error, returns by pressing and holding (for more than
1 second) the FEED switch.
• MSW 3-2: Clearing Cover Open Error
Function: Selects the method of clearing Cover Open error.
Resum Open Err
Operation at ON (1):
When the printer detects that cover is closed and the printer receives a command
<DLE+ENQ+n>, the error is cleared.
Operation at OFF (0):
When the printer detects that the cover is closed, it automatically clears the error.
• MSW 3-3: Reset signal for parallel I/F 31 Pin
Function: Selects whether to reset the printer by the signal of parallel I/F 31 Pin.
Parallel 31 Pin
Operation at ON (1):
Used as Reset signal.
Operation at OFF (0):
Not used as Reset signal.
OFF(0)
Valid
OFF(0)
Close
OFF(0) ON(1)
Valid Invalid
- 181 -
ON(1)
Invalid
ON(1)
Command