Citizen PPU-700 Command Reference Manual page 15

FF
[Function] (1) Printing in PAGE MODE and returning to STANDARD MODE (at the selection of PAGE
(2) Printing of Black mark and paper feeding to the top of the print position (with Black
[Code]
<0C>H
(1) At selection of PAGE MODE
[Outline] Executes a batch printout of the data mapped in the entire print area, and then returns
to STANDARD MODE.
[Caution] • All mapped data is erased after printout.
• The print area set up by ESC W is initialized.
• This command does not execute a paper cut.
• After this command is executed, the beginning of the line is taken as the start position
for the next print.
• This command is only effective when the PAGE MODE is selected.
[See Also] Appendix 4.1.4 "Example of Using PAGE MODE"
ESC
(2) At selection of Black mark paper (valid only for Black mark specification)
[Outline] This command prints the data in the printer buffer and searches for the head of the
next Black mark (Black mark position)
[Caution] • This command does not execute a paper cut.
• After this command is executed, the beginning of the line is taken as the start position
for the next print.
MODE)
mark paper selected)
FF, ESC L, ESC S
- 13 -