Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Citizen Manuals
  4. Printer Accessories
  5. CBM-202PC-04
  6. User manual

Citizen CBM-202PC-04 User Manual

Thermal printer mechanical control lsi
Hide thumbs Also See for CBM-202PC-04:

Advertisement

Quick Links

Download this manual

Advertisement

loading

Related Manuals for Citizen CBM-202PC-04

Summary of Contents for Citizen CBM-202PC-04

  • Page 2 5. We will not be responsible for the effects from the results of operating the printer, regardless of Section 4. 6. We cannot guarantee that the information herein does not infringe upon the industrial property, etc. of a third party, except when there is a written agreement to that effect. CITIZEN...
  • Page 3 4.9 Paper End Detection Circuit ..........................18 4.10 Motor Control Circuit ...........................19 4.11 Auto Cutter Control Circuit...........................20 4.12 Parallel Interface Circuit ..........................21 4.13 Serial Interface Circuit ..........................23 4.14 Switch Circuit...............................24 4.15 Error Output Circuit ............................25 4.16 Function Selection Circuit..........................27 4.17 External RAM Interface ..........................30 CITIZEN...
  • Page 4 9.1 Precautions ..............................39 9.2 Reflow Mounting............................39 9.3 Recommended Conditions for Different Mounting Methods ................39 9.4 Clearing Method ............................41 9.5 Storage Method.............................41 10.1 Command List ..............................42 10.2 Command Details ............................44 11.1 International..............................86 11.2 Domestic ..............................87 11.3 International Character Codes Table ......................88 CITIZEN...
  • Page 5 (3) Capable of selecting the parallel or serial interface. (4) Capable of selecting printing density via a function selection terminal. (5) Capable of printing a bar code. (6) Capable of printing double-width/height characters, bit images, and so on by various commands. LSI Name Applicable Mechanism CBM-202PC-04 LT-286 CITIZEN...
  • Page 6 For the information on maintenance and service, please contact our dealer or at the following address. Northern America Other Areas CBM America Corporation Japan CBM Corporation Service Center Information Systems Division 365 Van Ness Way CBM Bldg.,5-68-10 Nakano Suit 510 Nakno-ku, Tokyo 164-0001 Torrance, CA 90501, U.S.A Japan +1-310-781-1460 +81-3-5345-7540 +1-310-781-9157 +81-3-5345-7541 CITIZEN...
  • Page 7 Note) The printing speed above applies when the thermal printer is driven in the following environment: Drive voltage(VH) 7.2 V Thermal head temperature 30°C or more Simultaneous power-on(print) dots Within 64 dots Voltage : 5V DC Current consumption : 80mA at maximum 16 MHz CITIZEN...
  • Page 8 Vcc 0.7 Vcc+0.3 "HIGH" Level THEM AVcc+0.3 Others Vcc+0.3 Input "LOW" All input terminals –0.3 level Output "HIGH" All output terminals – = –1 level RESO – = 2.6 Output "LOW" LEDER,LEDPE – = 10 level Others = 1.6 CITIZEN...
  • Page 9 – – MOTORA Output Motor A – MOTORB Output Motor B – MOTORA Output Motor A – Note) For notation of the signals whose logic is "LOW"(Negative), a representation of XXX(Upper line) will be omitted for the subsequent notations. CITIZEN...
  • Page 10 HIGH HIGH HIGH HIGH HIGH HIGH HIGH – – Output HIGH Output HIGH Output HIGH Output HIGH Output HIGH Output HIGH Output HIGH Output HIGH – – Output HIGH Output HIGH Output HIGH Output HIGH Output HIGH Output HIGH CITIZEN...
  • Page 11 XTAL – XTAL (16MHz) – – – Output – Output Output Output – Input (Pull up to VCC at 10k ) HIGH Input (Pull down to GND at 10k ) Input (Pull up to VCC at 10k ) HIGH CITIZEN...
  • Page 12 Head strobe 1 HIGH STRB2 Output Head strobe 2 HIGH STRB3 Output Head strobe 3 HIGH STRB4 Output Head strobe 4 HIGH STRB5 Output Head strobe 5 HIGH STRB6 Output Head strobe 6 HIGH Input Serial DSR (RS-232C) HIGH CITIZEN...
  • Page 13 Parallel BUSY HIGH PAO7 Output – Output Parallel ACK – Output Parallel paper end HIGH FAULT Output Parallel FAULT CUTTERA Output Cutter A – CUTTERB Output Cutter B – CUTTERC Output Cutter C – CUTTERD Output Cutter D – CITIZEN...
  • Page 14 The reset state is effectuated by setting the RES terminal to "Low." To surely reset, it is necessary to set it to "Low" at least for 20ms at power-on and for 625ns while operating. If an external reset is not used, the parts enclosed by dotted lines are not required. CITIZEN...

  • Page 15: Oscillation Circuit

    There are two methods to supply a clock; one is to connect a ceramic oscillator, and the other is to input an external clock. When using the ceramic oscillator, we recommend the CSTCS16.00MXOC3 (With capacitor) made by MURATA. When inputting the external clock, you may either open the XTAL terminal or input an antiphase clock to the XTAL terminal. CITIZEN...
  • Page 16 When the print head is up, HEADUP (Pin 88) of the CPU is turned to "High," and if the printer is printing, it will immediately stop printing and output an error. It resumes printing when the print head is down. CITIZEN...
  • Page 17 The CPU itself has been set so that it will be reset. So that the head strobe will not be turned to ON at that time, be sure to insert one pull -up resistor into STRB1 through STRB3, respectively. CITIZEN...
  • Page 18 When the printer has no paper,PAPER (P in 7) of the CPU is turned to "HIGH." If printing is under way, it will stop after printing that line, and output an error. When the paper is set, printing is automatically resumed. CITIZEN...
  • Page 19 CBM-202PC-04 User’s Manual Avoid running the motor continuously for 15 minutes or more. CITIZEN...
  • Page 20 This CPU has a function to control the auto cutter, using the Pin 33 of the Gate Array. When the auto cutter is not used, set the Pin 33 of the Gate Array to "HIGH." If se t to "LOW," the printer will not function properly, resulting in an alarm. CITIZEN...
  • Page 21 When the parallel interface is not used, pull up STB(Pin 52) of the Gate Array with a 10k resistor. STB(Pin 87) of the CPU should be connected to INTR(Pin 56) of the Gate Array or pulled up with a 10k resistor. 1) Circuit CITIZEN...
  • Page 22 Output A signal to be output when the paper runs out. (Positive logic) FAULT Output A signal to indicate a printer error. (Negative logic) Timing chart T1, T2, T3 : 0.5 : 270 ns : 2.3 : 500 ms CITIZEN...
  • Page 23 CPU. If "HIGH," Input the data will be transmitted after the signal is turned to "LOW." Transmit the data when this signal is "LOW." Output written when it is "HIGH," an overrun error will result, ignoring the data. CITIZEN...
  • Page 24 (Turn on the power while holding down this switch, or apply a reset with this switch held down when the power has been already turned on. The printer automatically starts self-printing and returns to the normal waiting state after printing is completed.) CITIZEN...
  • Page 25 Note) The upper-limit voltage of 8.5V for the VH voltage error is a voltage assumed only immediately after charging the battery when the battery power is used and cannot be normally used. A maximum normal voltage is 7.2V. CITIZEN...
  • Page 26 If it has been selected, the auto loading function will be enabled to facilitate paper replacement. The upper-limit voltage of 8.5V for the VH voltage error is a voltage assumed only immediately after charging the battery when the battery power is used and cannot be normally used. A maximum normal voltage is 7.2V. CITIZEN...
  • Page 27 PBI2 PBI3 Auto loading Enabled Disabled PBI4 Drive system Dynamic drive Fixed division PBI5 Printing density See Table (3) PBI6 Unused – – PBI7 Unused – – PAI6 is valid only when the serial interface is used. CITIZEN...
  • Page 28 HIGH None 4800 HIGH HIGH 9600 HIGH HIGH HIGH 19200 HIGH HIGH 1200 HIGH HIGH 2400 HIGH Serial 4800 HIGH HIGH HIGH 9600 HIGH HIGH 19200 HIGH HIGH 1200 HIGH 2400 HIGH HIGH Even 4800 HIGH 9600 HIGH 19200 CITIZEN...
  • Page 29 Japan (JIS) HIGH HIGH HIGH Japan (Shift JIS) HIGH HIGH Sweden HIGH HIGH Denmark I HIGH U.K. HIGH HIGH Germany HIGH France HIGH U.S.A. (3) Printing density Printing Density PAI2 PBI5 Light HIGH HIGH Standard HIGH Slightly dark HIGH Dark CITIZEN...
  • Page 30 CBM-202PC-04 User’s Manual A 32 KB external SRAM is always required for printing. The printer does not function properly unless the external RAM is connected. 1) Circuit CITIZEN...
  • Page 31 Write data delay time – Write data setup time 1 – WDS1 Write data setup time 2 – WDS2 Write data hold time – Read data access time 1 – ACC1 Read data access time 2 – ACC2 Unit : ns CITIZEN...
  • Page 32 CBM-202PC-04 User’s Manual CITIZEN...

  • Page 33: Function Selection Circuit

    1st Step of Motor 2nd Step of Motor Different from the Fixed Division Number System, this method drives all the printing heads in the 1st step of the motor and simply feeds the paper in the 2nd step of the motor. CITIZEN...

  • Page 34: Head Drive

    During printing, therefore, the drive speed will be slowed down due to the head divided driving method. The drive speed at auto loading time is 1/4 of the maximum drive speed at each VH voltage. CITIZEN...
  • Page 35 When this is done, if the head-up lever is shifted down, auto loading will be performed. If the head-up lever is shifted up, shift it down. Then, auto loading will be performed. See Table 5.1 for the drive speed. CITIZEN...
  • Page 36 1) Turn on the power, setting LFSW(Pin 2) of the CPU to "LOW." Turn on both Vcc and VH almost simultaneously, or turn on Vcc, followed by VH(Within 500ms after Vcc). Fig. 6.1 shows a print sample(A print differs from actual dimensions). Fig. 6.1 CITIZEN...
  • Page 37 CBM-202PC-04 User’s Manual The following shows operation timings after resetting this CPU. CITIZEN...
  • Page 38 CBM-202PC-04 User’s Manual CITIZEN...
  • Page 39 The following describes the concepts of the recommended conditions, using Fig. 9.1. Fig. 9.1 CITIZEN...
  • Page 40 Fig. 6.2 and Fig. 6.3 shows the recommended conditions for the different mounting methods. Fig. 9.2 Infrared Reflow and Air Reflow Recommended Conditions CITIZEN...

  • Page 41: Reflow Mounting

    125°C) for 16~24 hours. The external terminals should be stored unprocessed. This is to avoid a soldering failure due to occurrence of rust at the time of mounting. CITIZEN...

  • Page 42: International

    Selecting the height of the bar code 1DH 68H n Selecting of print position of HRI code 1DH 48H n Selecting the font of HRI code 1DH 66H n Defining the download bit image 1DH2An1n2[d]n1xn2x8 Printing the download bit image 1DH 2FH m CITIZEN...
  • Page 43 Notes: 1. In the table n, n1, n2, n3, m, a, s, p, and d denote the parameters for each command. 2. In the table, [ ]k denotes a repeat count of k-times. 3. In the table, ’ ’ denotes an ASCII character. CITIZEN...
  • Page 44 Describes the associated commands for use. [Sample Program] Describes a coding example in the Q-BASIC sample program. This example is only for your reference and differs depending on the language used, version, and so on. For details, see the manual for the language used. CITIZEN...
  • Page 45 The head of the line becomes the next print starting position. [See Also] ESC 2, ESC 3 [Sample Program] [Print Results] LPRINT "AAA" + CHR$ (&HA) ; LPRINT "BBB" + CHR$ (&HA) ; LPRINT CHR$ (&HA) ; LPRINT "CCC" + CHR$ (&HA) ; CITIZEN...
  • Page 46 LPRINT "AAAAA" + CHR$ (&HA) ; LPRINT CHR$ (&H1B) + " " + CHR$ (1) ; LPRINT "AAAAA" + CHR$ (&HA) ; LPRINT CHR$ (&H1B) + " " + CHR$ (12) ; LPRINT "AAAAA" + CHR$ (&HA) ; [Print Results] CITIZEN...
  • Page 47 Specification with this command is invalid to Kanji, except specification and cancellation of highlighting In case that double height character and normal character exist in same one line, the layout of underline is consistent one. [Default] n = 0 [See Also] ESC E, ESC – CITIZEN...
  • Page 48 LPRINT CHR$ (&H1B) + " ! " + CHR$ (&H20) + "H"; LPRINT CHR$ (&H1B) + " ! " + CHR$ (&H80) + "H"; LPRINT CHR$ (&H1B) + " ! " + CHR$ (&HB9) + "H"; LPRINT CHR$ (&HA) ; [Print Results] CITIZEN...
  • Page 49 READ D DATA &HF8, &H06, &H01 LPRINTCHR$ (D) ; DATA &HF8, &H06, &H01 NEXT I DATA &H9F, &H06, &H01 NEXT J DATA &H87, &HFE, &H01 RETURN DATA &H80, &HFF, &HF9 DATA &H80, &H07, &HF9 DATA &HFF, &HFF, &HFF [Print Results] CITIZEN...
  • Page 50 Download characters thus defined remain valid until redefinition, ESC @ execution, GS * execution, or power OFF is practiced. [Caution] Download characters and download bit images can not be defined simultaneously. Running this command clears the definition of the download bit image. [Default] Same as the internal character set CITIZEN...
  • Page 51 CBM-202PC-04 User’s Manual [Example] Create each data bit by setting "1" for a printed dot and "0" for an unprinted dot. [Sample Program] [Print Results] See Sample Program and Print Results for ESC % on Page 49. CITIZEN...
  • Page 52 When the values set in m (Bit image mode) are out of the above range, the data following after n1 is processed as normal printing data. After completion of bit image printing, printer returns to normal data processing mode. CITIZEN...
  • Page 53 LPRINT CHR$ (33) + CHR$ (20) + CHR$ (0) ; LPRINT CHR$ (&H80) ; GOSUB IMG2 LPRINT CHR$ (&H00) ; LPRINT CHR& (&HA) ; LPRINT CHR$ (&H05) ; NEXT I LPRINT CHR$ (&HFF) ; LPRINT CHR$ (&HFF) ; LPRINT CHR$ (&HFF) ; RETURN [Print Results] CITIZEN...
  • Page 54 LPRINT "AAAAA" + CHR$ (&HA) ; LPRINT CHR$ (&H1B) + "2" ; LPRINT "AAAAA" + CHR$ (&HA) ; LPRINT "AAAAA" ; LPRINT CHR$ (&H1B) + "J" + CHR$ (100) ; LPRINT "AAAAA" + CHR$ (&HA) ; LPRINT "AAAAA" + CHR$ (&HA) ; CITIZEN...
  • Page 55 [Default] The initial value is n = 60 (1/6 inch) (18H), being 4.23 mm line feed rate. [Sample Program] [Print Results] See Sample Program and Print Results for ESC 2 on Page 54. CITIZEN...
  • Page 56 The initial value of n is "1". [Sample Program] LPRINT "AAAAA" ; LPRINT CHR$ (&H1B) + "=" + CHR$ (0) ; LPRINT "aaaaa" + CHR$ (&HA) ; LPRINT CHR$ (&H1B) + "=" + CHR$ (1) ; LPRINT "AAAAA" + CHR$ (&HA) ; [Print Results] CITIZEN...
  • Page 57 [Print Results] LPRINT CHR$ (&H1B) + " ! " + CHR$ (&H30) ; LPRINT CHR$ (&H1B) + "V" + CHR$ (1) ; LPRINT "AAA" + CHR$ (&HA) ; LPRINT CHR$ (&H1B) + "@" ; LPRINT "AAA" + CHR$ (&HA) ; CITIZEN...
  • Page 58 The horizontal tab position does not change even if the character width is altered after setting the horizontal tab position. [Default] Initial value is specified for each eight characters(9 column) of ANK characters. [See Also] [Sample Program] [Print Results] See Sample Program and Print Results for HT on Page 45. CITIZEN...
  • Page 59 [See Also] ESC ! [Example] [Sample Program] LPRINT CHR$ (&H1B) + "E" + CHR$ (0) ; LPRINT "AAABBB" + CHR$ (&HA) ; LPRINT CHR$ (&H1B) + "E" + CHR$ (1) ; LPRINT "AAABBB" + CHR$ (&HA) ; [Print Results] CITIZEN...
  • Page 60 Specified volume does not remain. The beginning of the line is to be considered as the next printing start position. Initial value is not defined. [Sample Program] [Print Results] See Sample Program and Print Results for ESC 2 on Page 54. CITIZEN...
  • Page 61 [Sample Program] FOR I=0 TO 10 LPRINT CHR$ (&H1B) + "R" + CHR$ (I) ; LPRINT " #$@[¥]^" ; LPRINT CHR$ (&H60) + "{¥} " ; LPRINT "n=" + STR$ (I) ; LPRINT CHR$ (&HA) ; NEXT I [Print Results] CITIZEN...
  • Page 62 [Default] The initial value of n is "0". [Sample Program] [Print Results] LPRINT CHR$ (&H1B) + "V" + CHR$ (0) ; LPRINT "AAAAA" ; LPRINT CHR$ (&H1B) + "V" + CHR$ (1) ; LPRINT "AAAAA" + CHR$ (&HA) ; CITIZEN...
  • Page 63 LPRINT CHR$ (&H1B) + "a" + CHR$ (0) ; LPRINT "AAAAA" + CHR$ (&HA) ; LPRINT CHR$ (&H1B) + "a" + CHR$ (1) ; LPRINT "AAAAA" + CHR$ (&HA) ; LPRINT CHR$ (&H1B) + "a" + CHR$ (2) ; LPRINT "AAAAA" + CHR$ (&HA) ; [Print Results] CITIZEN...
  • Page 64 The beginning of the line is to be considered as the next printing start position. [Default] The initial value is not defined. [Sample Program] LPRINT "AAAAA" LPRINT CHR$ (&H1B) + "d" + CHR$ (2) ; LPRINT "AAAAA" + CHR$ (&HA) ; [Print Results] CITIZEN...
  • Page 65 LPRINT "AAAAA" ; LPRINT CHR$ (&H1B) + "J" ; LPRINT CHR$ (150) ; LPRINT CHR$ (&H1B) + "i" ; LPRINT "AAAAA" ; LPRINT CHR$ (&H1B) + "J" ; LPRINT CHR$ (150) ; LPRINT CHR$ (&H1B) + "i" ; [Print Results] CITIZEN...
  • Page 66 LPRINT "AAAAA" ; LPRINT CHR$ (&H1B) + "J" ; LPRINT CHR$ (150) ; LPRINT CHR$ (&H1B) + "m" ; LPRINT "AAAAA" ; LPRINT CHR$ (&H1B) + "J" ; LPRINT CHR$ (150) ; LPRINT CHR$ (&H1B) + "m" ; [Print Results] CITIZEN...

  • Page 67: Domestic

    LPRINT CHR$ (C) ; NEXT C LPRINT CHR$ (&HA) ; LPRINT CHR$ (&H1B) + "t" + CHR$ (1) ; LPRINT " n=1 " ; FOR C=&HB1 TO &HB5 LPRINT CHR$ (C) ; NEXT C LPRINT CHR$ (&HA) ; [Print Results] CITIZEN...
  • Page 68 With paper Without paper Not defined Not used Fixed to 0 – Not defined Not defined Not defined [Sample Program] OPEN "COM1:N81NN" AS #1 ; PRINT #1, CHR$ (&H1B) + "v" ; A$ = INPUT$ (1, #1) ; CLOSE #1 CITIZEN...
  • Page 69 LPRINT CHR$ (&H1B) + "{" + CHR$ (0) ; LPRINT "AAAAA" + CHR$ (&HA) ; LPRINT "BBBBB" + CHR$ (&HA) ; LPRINT CHR$ (&H1B) + "{" + CHR$ (1) ; LPRINT "AAAAA" + CHR$ (&HA) ; LPRINT "BBBBB" + CHR$ (&HA) ; [Print Results] CITIZEN...
  • Page 70 LPRINT CHR$ (&HA) ; LPRINT CHR$ (&H1B) + "$" ; LPRINT CHR$ (100) + CHR$ (0) + "A" ; LPRINT CHR$ (&H1B) + "¥" ; LPRINT CHR$ (&HC2) + CHR$ (&HFF) + "B" ; LPRINT CHR$ (&HA) ; [Print Results] CITIZEN...
  • Page 71 Specifying exceeding the top of line or the end of line is ignored. [Default] The initial value is not specified. [See Also] ESC $ [Sample Program] [Print Results] See Sample Program and Print Results for ESC $ on Page 70. CITIZEN...
  • Page 72 This bar code, consisting of numerals only, has a fixed length of 12 columns; a 11 columns number entered from the host or application software plus a check column(12th column) automatically calculated inside the printer. If the 12th-column numeral is sent from the host, the entire bar code will be printed as it is. CITIZEN...

  • Page 73: Codabar (Nw - 7)

    The code subset B is the bar code consisting of standard uppercase/lowercase alphabets, numerals, symbols, control codes, and special codes. The code subset C is the bar code consisting of special characters and 100 kinds of numbers ranging from 00 to 99. CITIZEN...
  • Page 74 Input code TEST <85> Bar code data <CODE B>TEST<CODE A>123 [Sample Program] LPRINT CHR$ (&H1D) + "H" + CHR$ (2) ; LPRINT CHR$ (&H1D) + "k" ; LPRINT CHR$ (4) ; LPRINT "123" + CHR$ (0) ; [Print Results] CITIZEN...
  • Page 75 D is required as the start/stop code. Variable -length bar code consisting of all CODE128 128 ASCII code characters. Printing is done depending on bar code specification type, number of print columns, bar code height, width(Magnification), visible code presence, and bar code data specification. CITIZEN...
  • Page 76 LPRINT CHR$ (&H1D) + "h" + CHR$ (80) ; LPRINT CHR$ (&H1D) + "w" + CHR$ (4) ; GOSUB BC BC : LPRINT CHR$ (&H1D) + "k" ; LPRINT CHR$ (4) ; LPRINT "12" + CHR$ (0) ; RETURN [Print Results] CITIZEN...
  • Page 77 [Outline] Selecting bar code height. n denotes the number of dots in the vertical direction. [Default] The initial value of n is "162". [Sample Program] [Print Results] See Sample Program and Print Results for GS w on page 76. CITIZEN...
  • Page 78 LPRINT CHR$ (&H1D) + "H" + CHR$ (2) ; GOSUB BC LPRINT CHR$ (&H1D) + "H" + CHR$ (3) ; GOSUB BC BC : LPRINT CHR$ (&H1D) + "k" ; LPRINT CHR$ (4) ; LPRINT "12" + CHR$ (0) ; LPRINT CHR$ (&HA) ; RETURN CITIZEN...
  • Page 79 LPRINT CHR$ (&H1D) + "f" + CHR$ (0) ; GOSUB BC LPRINT CHR$ (&H1D) + "f" + CHR$ (1) ; GOSUB BC BC : LPRINT CHR$ (&H1D) + "k" ; LPRINT CHR$ (4) ; LPRINT "123" + CHR$ (0) ; LPRINT CHR$ (&HA) ; RETURN [Print Results] CITIZEN...
  • Page 80 Relations between the bit image data and the dot defined are shown below: If a download bit image is defined with this command while it is being printed (GS /), printing operation may become unstable (fluctuating print pitch). [See Also] GS / CITIZEN...
  • Page 81 1 = 10 : n 2= 5 LPRINT CHR$ (&H1D) + "*" ; LPRINT CHR$ (n1) + CHR$ (n2) ; FOR J=1 TO n1 * 8 FOR I=1 TO n2 LPRINT CHR$ (J) ; NEXT I NEXT J RETURN CITIZEN...
  • Page 82 If a download bit image data is defined while it is being printed with this command, printing operation may become unstable (fluctuating print pitch). [Default] The initial value is not specified. [See Also] GS * [Sample Program] [Print Results] See Sample Program and Print Results for GS * on Page 80. CITIZEN...
  • Page 83 |" + CHR$ (&HA) ; LPRINT "+ – – – +" + CHR$ (&HA) ; LPRINT CHR$ (&H1D) + " : " ; LPRINT CHR$ (&H1D) + " ^ " ; LPRINT CHR$ (2) + CHR$ (10) ; LPRINT CHR$ (0) ; CITIZEN...
  • Page 84 While in macro execution with n3=1, paper feed with the LFSW (Pin 2) is not available. [Default] Initially, this command is not specified. [See Also] GS : [Sample Program] [Print Results] See Sample Program and Print Results for GS : on Page 83. CITIZEN...
  • Page 85 Selecting the Fixed division system or the Variable division system. "n" is valid only for the lowest bit (n0). Print Drive System Fixed Division Number System Variable Division Number System [Default] The initial value of n is specified by the function selecting terminal (Gate Array Pin37) . CITIZEN...
  • Page 86 CBM-202PC-04 User’s Manual CITIZEN...
  • Page 87 CBM-202PC-04 User’s Manual CITIZEN...
  • Page 88 CBM-202PC-04 User’s Manual Country CITIZEN...