Sansui HDLCDVD325 Owner's Manual page 61

Connections to other equipment
To connect an audio system
This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using
the TV/DVD's remote control.
To control the audio, turn on the TV/DVD and the stereo amplifier, and turn off the TV/DVD's built-in speakers
(see "Turning off the built-in speakers" on page 34).
To VARIABLE
AUDIO OUT jacks.
NOTE:
To hear sound when using an external audio amplifier, the volume of both the TV/DVD and the amplifier must
be set above 0 (zero).
For example, if the volume of the TV/DVD is set to 0, you will not be able to hear any sound, even if the
volume of the amplifier is at its highest level.
To connect the TV/DVD to a camcorder, or a TV Game
To playback from a camcorder, connect the camcorder to the unit as shown.
This unit can also be used as a display device for many video games. However, due to the wide variety of
signals generated by these devices and subsequent hook-up variations required, they have not all been
included in the suggested connection diagrams. You'll need to consult each component's Owner's Manual for
additional information.
Camcorder
Audio cord (not supplied)
or
To Audio/
Video OUT
Audio/Video cord (not supplied)
Amplifier
To Audio (L) Input
Left side of unit
AUDIO IN (R)
AUDIO IN (L)
VIDEO IN
(continued)
To Audio (R) Input
61