Labeling Channels - Sansui HDLCDVD325 Owner's Manual

Labeling channels

Channel labels appear over the
channel number display each time
you turn on the TV, select a
channel, or press DISPLAY.
You can choose any four charac-
ters to identify a channel.
NOTE:
Select "RETURN" and press
to return from CH LABEL menu to
OPTION menu.
22
To create channel labels
1
Select a channel you want to label.
2
Press SETUP/TV MENU in the
TV mode, then press
select
Press L or M to select "CH
LABEL", then press
CH LABEL menu will appear.
3
Press L or M to select "SET/
CLEAR". Press
"SET".
4
Press ENTER to select "LABEL".
Then press
character in the first space.
Press the button repeatedly
until the character you want
appears on the screen.
The characters rotation
as follows:
If the character which you desire appears, press ENTER.
Repeat this step to enter the rest of the characters.
If you would like a blank space in the label name, you must
choose the empty space from the list of characters; otherwise, a
dash will appear in that space.
When you finish inputting label name, press ENTER.
5
Press EXIT to return to the normal screen.
6
Repeat steps 1-5 for other channel. You can assign a label to
each channel.
To erase channel labels
1
Select a channel with a label which you want remove.
2
Press SETUP/TV MENU, then press
(OPTION) menu.
Press L or M to select "CH LABEL", then press
the CH LABEL menu.
3
or Press L or M to select "SET/CLEAR". Press
"CLEAR", then press ENTER.
4
Press EXIT to return to the normal screen.
5
Repeat steps 1 - 4 to erase other channel labels.
or to
(OPTION) menu.
or . The
or to select
or to enter a
OPTION
ON TIMER OFF
CH LABEL
VIDEO LABEL
:SELECT :ADJUST
or to select
or to display
or to select