Using The Wow; Surround Sound Feature; Selecting The Hdmi Audio Input Source; Selecting The Digital Output - Sansui HDLCDVD325 Owner's Manual

Using the WOW

Notes:
• If the broadcast is monaural, the
SRS 3D effect will not work.
• The audio out jacks do not output
any of the WOW audio features.
WOW, SRS and symbol are
trademarks of SRS Labs, Inc.
WOW technology is incorporated
under license from SRS Labs, Inc.
TM surround sound feature/Selecting the HDMI
audio input source/Selecting the digital output
Using the WOW
WOW is a special combination of SRS Labs audio technologies that
creates a thrilling surround sound experience with deep, rich bass from
stereo sound sources. Your TV's audio will sound fuller, richer, and
wider. WOW consists of three features; SRS 3D, FOCUS, and TruBass.
1
Select STEREO mode (see "Selecting stereo/Second Audio
Program (SAP)" on page 34).
2
Press SETUP/TV MENU in the TV mode, then press
select
3
Press L or M to select the
desired WOW feature you want to
adjust.
SRS 3D: Press
FOCUS:
TruBass: Press
4
After your desired setting, press EXIT to return to the normal screen.

Selecting the HDMI audio input source

When you use HDMI AUDIO IN jacks with HDMI or DVI device, you
must select HDMI audio input source from "HDMI" or "DVI".
1
Press SETUP/TV MENU in the TV mode. Then press
select
2
Press L or M to select "HDMI",
then press
"HDMI" or "DVI".
HDMI: When you connect the
DVI:
3
Press EXIT to return to the normal screen.

Selecting the digital output

You can choose the format of the digital audio output signal.
1
Press SETUP/TV MENU, then press
(AUDIO) menu.
2
Press L or M to select "DIGITAL
OUTPUT", then press
select "PCM" or "DOLBY
DIGITAL".
3
Press EXIT to return to the
normal screen.
TM

surround sound feature

(AUDIO) menu.
or to turn on
or off the surround
sound effect.
Press or to turn on
or off the vocal emphasis effect.
or to select the bass expansion effect high,
low or off.
(AUDIO) menu.
or to select
HDMI device to the TV,
select this setting.
When you connect the
DVI device to the TV with analog
audio cords, select this setting.
or to
or to
or to
or to select
AUDIO
AUDIO LANGUAGE
DIGITAL OUTPUT PCM
PCM / DOLBY DIGITAL
RESET
: SELECT : ADJUST
35