Connections To Other Equipment - Sansui HDLCDVD325 Owner's Manual

The exact arrangement you use to interconnect various video and audio components to this unit is dependent
on the model and features of each component. Check the Owner's Manual provided with each component for
the location of video and audio inputs and outputs.
To connect the LCD TV/DVD to a VCR
VCR
To connect the LCD TV/DVD to a VCR with an S-Video cord
If you connect a VCR with a S-VIDEO cable to the S-VIDEO IN jack on the rear lower right of the unit, you must
also connect the audio cables to the AUDIO IN jacks on the rear lower right of the unit.
The S-VIDEO cable only carries the video signal. The audio signal is separate.
NOTE:
When the S-video cable and the standard video cable are connected at the same time, the S-video cable takes
precedence.
VCR
To connect to a DVD player with Component Video Input
You can enjoy a high quality picture by connecting the unit's COMPONENT VIDEO OUT jacks of your DVD
player with the COMPONENT video cables (not supplied).
VCR
To Audio out
NOTE:
Component Video input of this unit are for use of device which output 480i/1080i interlaced signals and 480p/
720p progressive signals.

Connections to other equipment

To Audio/Video OUT
Audio/Video cord (not supplied)
AUDIO IN (R)
To Audio OUT
AUDIO IN (L)
Audio cord (not supplied)
S-Video cord (not supplied)
To Component
COMPONENT (P
Video output
Video cord (not supplied)
Audio cord (not supplied)
Rear lower right of the unit
AUDIO IN (R)
AUDIO IN (L)
Rear lower right of unit
Rear lower right of unit
, P , Y) IN
R B
VIDEO IN
S-Video IN
COMPONENT
AUDIO (L/R) IN
59