Page 1
OWNER’S MANUAL 19” TFT LCD DIGITAL TV WITH DVD PLAYER HDLCDVD190 ATTENTION If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the required programming code. TV/CABLE MODE SELECTION When shipped from the factory, the Tuning Band option is set to the “Cable” (Cable Television) mode. If not using CABLE, set this option to the “Air”...
Page 2
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE THE RISK OF ELECTRIC The exclamation point within an...
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a clean dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Page 4
IMPORTANT SAFETY INSTRUCTIONS (continued) EXAMPLE OF ANTENNA GROUNDING AS PER THE NATIONAL ELECTRICAL CODE ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) GROUNDING CONDUCTORS ELECTRIC SERVICE (NEC SECTION 810-21) EQUIPMENT GROUND CLAMPS POWER SERVICE GROUNDING NEC-NATIONAL ELECTRICAL CODE ELECTRODE SYSTEM S2898A (NEC ART 250, PART H)
SAFETY PRECAUTIONS The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause overheating. Do not block ventilation holes, or set up near radiators. Do not place in direct sunshine. When placing on a shelf leave 10 cm (4 inches) free space around the entire unit.
Features LCD color TV With DVD/CD player Unique space saving design combines a 19” LCD color TV and a DVD/CD player. A DVD disc has much more capacity, but is the same size as an audio CD disc. The Picture/Audio quality of a DVD exceeds other software.
Contents Before using your unit Playback operation Preparation .............38 IMPORTANT SAFETY INSTRUCTIONS ...3 Status display of disc ........38 SAFETY PRECAUTIONS .........5 Playback procedure ........39 IMPORTANT NOTICE ........5 Special playback ..........40 Features ............6 MP3/WMA/JPEG and Audio CD playback ..41 Contents ............7 Setting the JPEG interval ........43 Disc..............8 Location of controls ...........9...
Disc Playable discs CAUTION: Disc type and logo mark content • Only the left types of discs can be played on this unit. DVD-ROM, CD-ROM, SVCD, CVD, VCD, etc. Audio cannot be played. • 8cm discs can be played directly. If an 8cm disc DVD Video Video adapter is used it will cause errors.
Location of controls MENU button CHANNEL ▲/▼ buttons INPUT button VOLUME +/– buttons POWER button PLAY button SKIP button STOP button EJECT button Front Loudspeakers POWER indicator Remote sensor To display the menu screen. Press MENU button to display the menu screen. CHANNEL ▲/▼...
Page 10
Location of controls (continued) Right side DISC slot Rear HEADPHONE jack COMPONENT AUDIO IN jacks PC IN jack RF (ANT) IN jack COMPONENT IN jacks AV IN jacks PC AUDIO IN jack COAXIAL DIGITAL AUDIO OUT jack...
Remote control Page POWER Power On/Off 15, 19, 38, 39 DISPLAY/– Call TV information 20, 22, 34 Call DVD information Input “–” for digital channels TV/DVD Switch between TV/AV and DVD 15, 19, 38, 39 (EJECT) Eject a disc Direct channel selection of TV Input setting Enter a password 23~26, 55~57...
Remote control (continued) Inserting Batteries Open the battery compartment Install two “AAA” batteries, Replace the compartment cover. cover in the direction of the arrow. paying attention to the polarity diagram in the battery compartment. Operation • Aim the remote control at the remote sensor and press control buttons to operate.
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see page 15 for Cable TV connections. Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack.
Cable TV connections This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable TV Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the Cable TV company.
Setting the language You can choose from three different To turn on the TV, press POWER. languages (English, French and (POWER indicator on the front of the unit blinks while starting. Spanish) for the on-screen displays. It may take approx. 15 seconds for a picture to appear on Select the language you prefer first, screen.) then proceed with the other menu...
Memorizing channels This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV’s memory. To use this TV with an antenna, set the Tuning Band menu option to the Air mode.
Memorizing channels Automatic channel search Press SETUP/TV MENU in the TV mode. The menu screen will appear. Press ▲ or ▼ to select “Setup” menu, then press Tuning Band Cable Picture ▶. DTV Signal Auto Ch Search Press ▲ or ▼ to select Add On Ch Search Audio “Auto Ch Search”.
Page 18
Memorizing channels Manual Ch Set You can select the channel that you want to skip. Press SETUP/TV MENU in the TV mode. The menu screen will appear. Press ▲ or ▼ to select “Setup” menu, then press Tuning Band Cable Picture ▶.
TV operation To turn on the TV, press POWER. (POWER indicator on the front of the unit blinks while starting. It may take approx. 15 seconds for a picture to appear on screen.) Press TV/DVD to select TV mode. Adjust the volume level by pressing VOL + or –...
TV operation To select the video input source Press INPUT SELECT to view a signal from another device connected to your LCD TV, such as a VCR or DVD player. You can select ANT, Composite, S-Video, Component or PC depending on which input jacks you used to connect your devices.
Page 21
TV operation SLEEP The sleep timer allows you to set a time when the LCD TV automatically switches to standby. Press SETUP/TV MENU in the TV mode. The menu screen will appear. Press ▲ or ▼ to select “Feature” menu, then Sleep Timer Picture Advanced Video Menu...
Labeling channels Channel labels appear over the To create channel labels channel number display each time Press SETUP/TV MENU in the TV mode, then press ▲ or ▼ to you turn on the TV, select a channel, select “Setup” menu, then press ▶. or press DISPLAY.
Setting the V-Chip An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that you may choose to exclude. The restriction applies to “TV RATING” and “MPAA” if this data is transmitted. You may set this restriction separately. To use the V-Chip function, you must register a password.
Page 24
Setting the V-Chip To set the V-Chip Press SETUP/TV MENU in the TV mode. Sleep Timer Picture Press ▲ or ▼ to select Advanced Video Menu Password Set “Feature” menu, then Parental Control press ▶. Audio NTSC CC ATSC CC Setup Digital Closed Caption Feature...
Page 25
Setting the V-Chip To change the password Press SETUP/TV MENU in the TV mode. The TV menu screen will appear. Press ▲ or ▼ to select “Feature” menu, then Sleep Timer Picture press ▶. Advanced Video Menu Password Set Parental Control Audio NTSC CC ATSC CC...
Page 26
Setting the V-Chip Downloading the additional V-Chip rating system As a supplement to the standard V-Chip rating system, your television will be able to download an additional rating system, if such a system becomes available in the future. To download the additional V-Chip rating system (when available) Press SETUP/TV MENU in a digital channel.
Closed Caption WHAT IS CLOSED CAPTIONING? This television has the capability to decode and display Closed Captioned television programs. Closed Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language. Captions: This Closed Caption Mode will display text on the screen in English or another language.
CC advanced When you have selected Custom as This feature is designed to customize Digital Captions only. the display method, you can adjust Press SETUP/TV MENU in the TV mode. The TV menu screen the various setting listed below as will appear.
Setting the picture size Selecting the picture size You can view 480i and 480p format programs in a variety of picture Press SETUP/TV MENU sizes— Normal, Zoom, Wide and in the TV mode. Cinema. Picture Mode Vivid Picture Press ▲ or ▼ to select Contrast “Picture”...
Page 30
Setting the picture size NOTE: Wide picture size (for 4:3 format programs) • In COMPONENT mode with a To fill the screen, the right and left edges are extended, however; scanning rate of 720p or 1080i, only the center of the picture remains near its former ratio. the Normal and Cinema picture size features are available.
Adjusting the picture preference/Picture control adjustment Adjusting the picture preference You can select four picture modes— Vivid, Standard, Movie and User—as Press SETUP/TV MENU in the described in the following table: TV mode. Then press ▲ or ▼ to Picture Mode Vivid Picture Contrast...
DNR/Selecting the color temperature DNR (Digital Noise Reduction) can reduce the roughness of the picture. Press SETUP/TV MENU in the TV mode. Then press ▲ or ▼ Sleep Timer Picture Advanced Video Menu to select “Feature” menu, then Password Set press ▶.
Setting the 3D Y/C 3D Y/C reduces visible interference Press SETUP/TV MENU in your TV picture. This is useful in the TV mode. Then Sleep Timer when receiving a broadcast with Picture press ▲ or ▼ to select Advanced Video Menu a weak signal (especially a Cable Password Set “Feature”...
Selecting Stereo/Second Audio Program (SAP)/ Sound control adjustment Selecting Stereo/Second Audio Program (SAP) The multi-channel TV sound (MTS) feature provides high-fidelity stereo Press SETUP/TV MENU in the sound. MTS also can transmit TV mode. Then press ▲ or ▼ a second audio program (SAP) Audio Language English Picture...
Selecting the audio language/ Selecting the digital output Selecting the audio language When two or more audio languages are included in a digital signal, you can select one of the audio language. Press SETUP/TV MENU in the TV mode. Then Audio Language English Picture...
Checking the Digital-signal strength/ Resetting your settings Checking the Digital-signal strength This TV will allow you to view the digital signal meter for digital channels. Press SETUP/TV MENU in the TV mode. Then Tuning Band Cable Picture press ▲ or ▼ to select DTV Signal Auto Ch Search “Setup”...
Picture control adjustment in the Component and PC mode You can adjust to optimize the Example: Adjust the H-Pos in the component mode. performance of the TV in the Press INPUT SELECT repeatedly to select the component Component and PC mode. mode.
Preparation/Status display of disc The following pages describe the Preparation setup/operation in DVD mode. Before DVD/CD operation, please make the following preparations. Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet. • If the AC cord plug is plugged in for the first time, wait for about 5 seconds before pressing POWER.
Playback procedure Press TV/DVD to select DVD mode. Place the disc in the disc slot with the label side facing forward. (If the disc has a label.) Hold the disc without touching either of its surfaces, align it with the guides, and place it in position.
Special playback NOTE: There may be a slight delay Fast Forward Playback between when you press the button Press SEARCH during normal playback. and the function activating. Each press of SEARCH will increase the speed of the search (x 2), (x 4), (x 8), (x 15).
MP3/WMA/JPEG and Audio CD playback MP3 CD/WMA and Audio CD playback This player can play back MP3/WMA/ JPEG-data which has been recorded on Load a MP3/WMA/JPEG CD or an Audio CD in the disc slot. CD-R or CD-RW. To produce MP3/WMA/ JPEG-data, you need a Windows-PC with CD-ROM drive and MP3/WMA/ “Reading”...
MP3/WMA/JPEG and Audio CD playback (continued) In the file browser, press▲/▼ to select the desired JPEG file. /Picture-01.JPG Picture-01 Select Files To display a thumbnail list, press Picture-02 Repeat :Off DVD MENU. Picture-03 Mode :Off Picture-04 Press ▲/▼/◀/▶ to select the Picture-05 desired file.
Setting the JPEG interval You can continuously play back all Press SETUP/TV MENU in the stop mode. JPEG files automatically. Press ▲ or ▼ to select option, then press ◀/▶ or ENTER. Press ▲ or ▼ to select “JPEG TV Screen : 16:9 Interval”, then press ▶...
Program playback (CD) You can arrange the order of tracks In the file browser, press on the disc. ▲/▼/◀/▶ to select “Edit Mode”, Folder-1 then press ENTER. Repeat :Off Folder-2 Mode :Off MP3-1 Edit Mode When “Edit Mode” is black color, MP3-2 MP3-3 you can mark the files which you...
Zooming/Locating desired scene Zooming This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame. Press ZOOM during playback. The center part of the image will be zoomed in. Each press of ZOOM will change the ZOOM magnification 1 (x...
Repeat playback Title, Chapter, Track Playback Press PLAY MODE during playback or stop mode. Press ENTER repeatedly to Play Mode select “Chapter” or “Title”. Repeat : Off The unit automatically starts repeat playback after finishing the current title or chapter. •...
Marking desired scenes The TV/DVD stores the points that Marking the Scenes you want to watch again. You can Press MARKER during playback. resume playback from that scene. Marker 1 Marker 2 Marker 3 Select the blank Marker using ▲ or ▼, then press ENTER at the Marker 1 00 27 54...
Changing soundtrack language/Subtitles Changing soundtrack language You can select the language when you play a multilingual disc. Press AUDIO during playback. 1/2 Eng Dolby Digital The current soundtrack language will appear. Press AUDIO repeatedly until the desired language is selected. The on-screen display will disappear after a few seconds.
Changing angles/Title selection/DVD menu Changing angles When playing back a disc recorded with multi-angle facility, you can change the view angle. Press ANGLE during playback. The current angle will appear. Press ANGLE repeatedly until the desired angle is selected. Title selection Two or more titles are recorded on some discs.
Setting the language You can select the language of Press SETUP/TV MENU in the stop mode. “Menu”, “Subtitle” and “Audio” Press ▲ or ▼ to select option, then press ◀/▶ or ENTER. if more than one languages are recorded onto the disc. Press ▲...
Setting the aspect ratio of TV screen/Setting on screen display Setting the aspect ratio of TV screen You can select the aspect ratio of the picture. Press SETUP/TV MENU in the stop mode or No Disc. Press ▲ or ▼ to select option, then press ◀/▶...
Setting the picture mode Setting the picture mode There are two types of source content in pictures recorded in DVD Press SETUP/TV MENU in the stop mode. video discs: film content (pictures Press ▲ or ▼ to select option, then press ◀/▶ or ENTER. recorded from films at 24 frames per second) and video content Press ▲...
Night Mode/Digital Out Night Mode Night Mode enables you to control the dynamic range so as to achieve a suitable sound for your equipment. Press SETUP/TV MENU in the stop mode or No Disc. Press ▲ or ▼ to select option, then press ◀/▶...
Parental control setting Some discs are specified not Press SETUP/TV MENU in the stop mode or No Disc. suitable for children. Such discs can Press ▲ or ▼ to select option, then press ◀/▶ or ENTER. be limited not to play back with the unit.
Setting the new password Press SETUP/TV MENU in the stop mode or No Disc. Press ▲ or ▼ to select option, then press ◀/▶ or ENTER. Press ▲ or ▼ to select Parental : Off “Password”, then press ▶ or Password : Change ENTER.
Temporary disabling of rating level by DVD disc Some pre-recorded DVD discs may Load a DVD disc (see page attempt to temporarily cancel the 39). rating level that you have set. You will be given the option to allow or not allow the override.
Language code list Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” (see page 51). Language Name Code Language Name Code Language Name Code Language Name Code Abkhazian 1112 Fiji 1620 Lingala 2224 Singhalese 2919 Afar 1111 Finnish 1619 Lithuanian 2230 Slovak...
Connections to other equipment The exact arrangement you use to interconnect various video and audio components to this unit is dependent on the model and features of each component. Check the Owner’s Manual provided with each component for the location of video and audio inputs and outputs. To connect the LCD TV/DVD to a VCR Rear of the unit To AUDIO/VIDEO IN...
Page 60
Connections to other equipment (continued) Using an AV Amplifier with built-in digital surround If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie. Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, or MPEG decoder etc.
Page 61
Connections to other equipment (continued) To connect the TV/DVD to a PC (Personal Computer) Before you connect this TV/DVD to your PC, change the adjustment of your PC’s Resolution and Refresh rate (60 Hz). Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the VGA connector PC MONITOR on the back of the TV/DVD.
Reception disturbances Most types of television interference can be remedied by adjusting the height and position of the VHF/ UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast.
Problems and troubleshooting Use the following check list for troubleshooting when you have problems with your TV/DVD. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS POSSIBLE SOLUTIONS PAGE POWER...
Page 64
Problems and troubleshooting (continued) SYMPTOMS POSSIBLE SOLUTIONS PAGE • No disc is inserted. Playback doesn’t start. • The disc may be dirty. Clean up the disc. • The unit cannot play CD-ROMs, etc. No picture. • TV/DVD selector is not set correctly. •...
Specifications GENERAL Power supply: AC 120V 60Hz Power consumption: Operation: 60W Stand by: 1W Weight: 6.6 kg (14.6 lbs) Dimensions: Width: 483 mm (19 inches) Height: 396 mm (15-9/16 inches) Depth: 190 mm (7-1/2 inches) Operating temperature: 5˚C - 40˚C Operating humidity: Less than 80% TELEVISION...
limited WARRANTY 19” TFT LCD TV WITH DVD PLAYER ORION warrants this product to be free from manufacturing defects in material and workmanship under normal use and conditions for a period of 90 days from date of original purchase in the United States. Should service be necessary under this warranty for any reason due to a manufacturing defect or malfunc- tion during the first ninety (90) days from date of original purchase, ORION will provide carry-in repair service by an ORION authorized Independent Service Center at no charge.