Preparation; Status Display Of Disc - Sansui HDLCDVD325 Owner's Manual

Preparation/Status display of disc
The following pages describe the
setup/operation in DVD mode.
NOTE:
If the unit does not operate properly:
Static electricity, etc., may affect the play-
er's operation. Disconnect the AC power
cord once, then connect it again.
38

Preparation

Before DVD/CD operation, please make preparations as follows.
1
Insert the AC cord plug into a standard 120V 60Hz polarized
AC outlet.
• If the AC cord plug is plugged in for the first time, wait for
about 5 seconds before pressing POWER.
NOTE: When connecting to other equipment, unplug the unit
from the AC outlet.
2
Press POWER on the unit or on the remote control to turn on
the unit. The POWER indicator will light.
• Every time you press POWER, the TV/DVD starts from TV
mode.
• When using an amplifier, switch on the amplifier.
3
Press TV/DVD to select DVD
mode.
The DVD startup screen will ap-
pear on the screen.

Status display of disc

Press DISPLAY twice. The status display of the disc will appear
on the screen.
DVD
Play status
Chapter No
T
Title number
Subtitle language
To make the status display screen disappear, press DISPLAY
again.
Audio CD
Disc operation
Track number T
• When you play a CD disc, the status display will appear
and remain on the screen.
No Disc
Title elapsed playing time
Title total time
C
Type of audio
Camera angle
Audio language
Display Off
Track elapsed playing time
Track total time