Canon LBP-1000 Service Manual page 96

E. Fixing Unit
1) Turn OFF the power switch, and then
unplug the power cable.
2) Remove the rear cover.
3) Disconnect the 2 connectors, remove
the 4 screws, and then pull out the fix-
ing unit toward you.
Connectors Screws
Fixing unit
Figure 3-3-8
Note: Be sure to turn the power OFF and
unplug the power cord before
replacing the fixing unit.
power-OFF, wait for a while to
allow the fixing unit to cool down.
After
CHAPTER 3
3 - 9