Customer - Canon LBP-1000 Service Manual

VI. MAINTENANCE AND SERVICING BY THE CUSTOMER
Table 1-6-1 shows the maintenance the customer should conduct to ensure optimum machine
performance at all times.
1. Cartridge
Rock the cartridge or replace, when necessary.
2. Transfer guide unit
When replacing the cartridge, wipe the transfer guide unit with a tightly wrung wet soft cloth,
and then with a dry cloth.
3. Pressure roller
When black spots adhere to the surface or the back of the print, clean the pressure roller as
below.
1) Open the face-up tray to switch to the face-up delivery.
2) Open the multi-purpose tray, and then load A4-size print paper.
3) Press the Go key to off-line the printer.
4) Keep pressing the Menu key until the "TEST MENU" message appears in the upper line of
the status display panel.
5) Keep pressing the Item key until the "CLEANING PAGE" message appears in the lower line
of the status display panel. Press Go key after the message appears so that the printer feeds
the paper and starts cleaning the pressure roller.
6) Press the Go key to set the printer off-line.
Transfer charging roller
Figure 1-6-1
CHAPTER 1
Green mark
Transfer charging roller
1 - 17