Canon LBP-1000 Service Manual page 91

CHAPTER 3
4) Unhook the claw, and then remove the
arm from the top cover unit.
5) Remove the 2 screws, unhook the claw,
and then lift up the top cover unit.
Arm Screws
Claws Top cover unit
Figure 3-2-4
6) Lifting the flat cable, gently remove it
from the connector PCB. Remove the
top cover.
Flate cable Top cover unit
Figure 3-2-5
< Note for reassembly >
When installing the top cover, be sure to set
the flat cable securely.
3 - 4
3. Right cover
1) Remove the cassette.
2) Open the top cover.
3) Open the multi-purpose tray.
4) Unhook the claw. Slide the right cover
toward you (1), and then turn it in the
direction of the arrow (2) to remove.
Claw Right cover
Figure 3-2-6