Canon LBP-1000 Service Manual page 95

CHAPTER 3
C. Cassette Pick-up Unit
1) Remove the drive unit according to the
steps 1) through 3) on page 3-7.
2) Remove the spring and gear.
Spring Gear
Figure 3-3-4
3) Remove the left cover, and then place
the printer with its left side at the bot-
tom.
4) Remove the 3 screws and then the cas-
sette pick-up unit.
Screws
Cassette pick-up unit
Figure 3-3-5
3 - 8
D. Registration Roller Unit
1) Remove the drive unit according to the
steps 1) through 3) on page 3-7.
2) Remove the gear.
Gear
Figure 3-3-6
3) Remove the 6 screws and then the reg-
istration roller unit.
Screws
Registration roller unit
Figure 3-3-7