Canon LASER SHOT LBP-3600 User Manual page 425

Cause 2
Remedy
Cause 3
Remedy
Cause 4
Remedy
Cause 5
Remedy
Residual images appear on non-printed areas.
Cause 1
Remedy
7
Cause 2
Remedy
Cause 3
Remedy
The overall print result is faint.
Cause 1
Remedy
Cause 2
Remedy
7-42 Print Quality Problems
The transport roller is dirty.
Clean the transport roller. (See "Replacing the Toner Cartridge," on p. 5-2)
Paper is damp since the paper has been stored in unsuitable condition.
Change the paper with new one and print again. (See "Paper Requirements,"
on p. 2-2)
The transfer roller or photosensitive drum in the toner cartridge is dirty.
Clean the transfer roller and photosensitive drum. (See "Cleaning the Transfer
Roller and Photosensitive Drum," on p. 5-26)
The photosensitive drum in the toner cartridge is deteriorating.
Replace the toner cartridge with a new one. (See "Replacing the Toner
Cartridge," on p. 5-2)
Printing paper is inappropriate.
Change the paper or transparencies and print again. (See "Paper
Requirements," on p. 2-2)
The photosensitive drum in the toner cartridge is deteriorating.
Replace the toner cartridge with a new one. (See "Replacing the Toner
Cartridge," on p. 5-2)
Paper of a wider width was printed just after paper with a width of Letter wide
(279.4 mm) or narrower was printed continuously.
To lower the temperature of the fixing unit, wait for a while before printing again.
The setting for [Toner Density] is not appropriate.
Drag the [Toner Density] slider in the printer driver toward [Dark].
In order to specify the setting for [Toner Density], click the [Details] button in the
[Quality] sheet to open the [Detailed Settings] dialog box.
[Use Toner Save] is selected.
Remove the checkmark from [Use Toner Save] in the printer driver.
In order to specify the setting for [Use Toner Save], click the [Details] button in
the [Quality] sheet to open the [Detailed Settings] dialog box.