Power Supply - Canon LASER SHOT LBP-3600 User Manual

•
Never block the ventilation slots on the printer. The ventilation slots are provided for
proper ventilation of working parts inside the printer. Blocking the ventilation slots
can cause the printer to overheat, resulting in a fire. Never place the printer on a soft
surface, such as a sofa or rug.
•
Do not install the printer in the following locations, as this may result in a fire or
electrical shock:
- A damp or dusty location
- A location exposed to smoke and steam such as cookeries and humidifiers
- A location exposed to rain or snow
- A location near water faucets or water
- A location exposed to direct sunlight
- A location subject to high temperatures
- A location near open flames
•
When installing the printer, gently lower the printer onto the floor or other machine to
avoid catching your hands, as this may result in personal injury.
•
When connecting the interface cable, connect it properly according to this manual. If
not connected properly, this may result in malfunction or electrical shock.
•
When moving the printer, follow the instructions in this manual to hold it correctly.
Failure to do so may cause you to drop the printer, resulting in personal injury. (See
"Moving the Printer," on p. 5-37)

Power Supply

WARNING
•
Do not damage or modify the power cord. Also, do not place heavy objects on the
power cord, or pull on or excessively bend it, as this could cause electrical damage
and result in a fire or electrical shock.
•
Keep the power cord away from a heat source; failure to do this may cause the power
cord coating to melt, resulting in a fire or electrical shock.
•
Do not plug or unplug the power plug with wet hands, as this may result in electrical
shock.
•
Do not plug the power cord to a multiplug power strip, as this may cause a fire or
electrical shock.
•
Do not bundle up or tie the power cord in a knot, as this may result in a fire or
electrical shock.
•
Insert the power plug completely into the AC power outlet, as failure to do so may
result in a fire or electrical shock.
•
Do not use power cords other than the power cord provided, as this may result in a
fire or electrical shock.
•
As a general rule, do not use extension cords or plug extension cords to a multiple
power strip. If extension cords must be used or plugged to a multiple power strip,
however, use them observing the following points on user's own authority. If you use
extension cords improperly, this may result in a fire or electrical shock.
- Do not connect one extension cord to another.
xiii