Canon LASER SHOT LBP-3600 User Manual page 42

IMPORTANT
•
Do not use the labels in the following conditions. Using inappropriate labels may result in
paper jams that are difficult to clear or may result in damage to the printer.
- Peeled labels or partly used labels
- Coated labels that are easily peeled off from the backing sheet
- Labels with uneven adhesive
•
When printing labels, take out one piece at a time each time it is delivered.
I Envelope
This printer can print Envelope DL, Envelope COM10, Envelope C5, Envelope Monarch,
and Envelope B5. Load the envelopes with the address side (non-glued side) facing up in
the multi-purpose tray.
IMPORTANT
•
The printable envelope types are shown below:
Envelope DL
110.0 mm x 220.0 mm
(4.33 in. x 8.66 in.)
Envelope COM10
105.0 mm x 241.0 mm
(4.13 in. x 9.49 in.)
*Envelopes (Envelope DL, Envelope COM10, Envelope Monarch, Envelope C5)
with a flap on the short edge cannot be used.
•
Do not use the following types of envelopes. Using inappropriate envelopes may result in
paper jams that are difficult to clear or may result in damage to the printer.
- Envelopes with fasteners or snaps
- Envelopes with address windows
- Envelopes with adhesive on the surface
- Wrinkled or creased envelopes
- Poorly manufactured envelopes in which the glued parts are uneven
- Irregularly-shaped envelopes
•
Before loading the envelopes, flatten the stack of envelopes to release any remaining air,
and press the fold lines along the edges tight.
•
Do not print on the reverse side (glued side) of envelopes.
•
Printing speed drops when printing on envelops.
NOTE
When printing envelopes, they may be creased.
Envelope Monarch
98.0 mm x 191.0 mm
(3.86 in. x 7.52 in.)
Envelope C5
162.0 mm x 229.0 mm
(6.38 in. x 9.02 in.)
Envelope B5
176.0 mm x 250.0 mm
(6.93 in. x 9.84 in.)
Paper Requirements
2
2-5