Introduction; After Installing The Printer; Steps For Printing To Be Followed Each Time - Canon LASER SHOT LBP-3600 User Manual

Introduction

After Installing the Printer

The following shows the tasks that should be performed after installing the printer:
I Installing the printer driver
The printer driver is software required for printing from an application you use. Specify the
3
print settings in the printer driver. The procedure for installing the printer driver varies
depending on the network environment.
•
When printing with the printer and computer connected with the USB cable (See p. 3-4)
•
When printing with the optional network board installed, and the printer and the
computer connected with LAN (See Network Guide)
I Sharing the printer on a network (See p. 3-57)
If you share this printer on a network and use it from a computer on the network, you must
specify the settings for the computer and install the printer driver on the client computers.

Steps for Printing to Be Followed Each Time

The following shows the tasks that should be performed each time you print:
I Specifying printing preferences
Specify the paper size, document size, and print copies in the printer driver. If you do not
specify these printing preferences properly, you may not obtain an accurate print.
I Performing printing
Select the print menu from the application. This procedure differs depending on the
application you use. See the instruction manual supplied with your application.
3-2

Introduction