Processor Option - HP BL2x220c - ProLiant - G5 Server A User Manual

Install the cable shield.
20.
Install the server A USB key, if removed.
21.
CAUTION:
the server B assembly is installed.
Install the server B assembly
22.
Install the server blade
23.

Processor option

WARNING:
internal system components to cool before touching them.
CAUTION:
Do not touch the processor socket contacts.
•
Always install the processor socket cover after removing the processor from the socket.
•
Do not tilt or slide the processor when lowering the processor into the socket.
•
CAUTION:
Handle the processor only by the edges.
•
Do not touch the bottom of the processor, especially the contact area.
•
CAUTION:
multiprocessor configurations must contain processors with the same part number.
CAUTION:
with a processor and a heatsink or a processor socket cover and a heatsink blank.
Route the cache module battery cables so that they do not become pinched when
("Install server B
("Installing a server
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To avoid damage to the system board:
To avoid damage to the processor:
To prevent possible server malfunction and damage to the equipment,
To prevent possible server blade overheating, always populate processor socket 2
assembly" on page 15).
blade" on page 19).
Hardware options installation 30