HP BL2x220c - ProLiant - G5 Server A User Manual page 28

Install the battery tray.
9.
Do one of the following:
10.
If a heatsink blank is installed on processor socket 2, then remove the heatsink blank, route the
o
cables between the processor socket and the chassis, and install the heatsink blank.
CAUTION: Route the cable so that it does not become pinched when the system board is
installed.
If a processor and heatsink are installed in processor socket 2, then remove the server A system
o
board assembly, route the cables between the heatsink and the system board, and install the
system board assembly.
Install the cable clips.
11.
Route both cables around the edge of processor socket 2 and through the clip located near
12.
processor socket 2.
Hardware options installation 28