Remove the thermal interface protective cover from the heatsink.
11.
CAUTION:
Heatsink retaining screws should be tightened in diagonally opposite pairs (in an
"X" pattern).
IMPORTANT:
bracket with the alignment holes in the heatsink.
Install the heatsink.
12.
CAUTION:
Route the cache module battery cables so that they do not become pinched when
the server B assembly is installed.
Install the server B assembly
13.
Install the server blade
14.
When installing the heatsink, align the guide pins on the processor retention
("Install server B
("Installing a server
blade" on page 19).
assembly" on page 15).
Hardware options installation 35