Hardware Options Installation; Introduction; Hard Drive Option - HP BL2x220c - ProLiant - G5 Server A User Manual

Hardware options installation

Introduction

If more than one option is being installed, read the installation instructions for all the hardware options
and identify similar steps to streamline the installation process.
WARNING:
internal system components to cool before touching them.
CAUTION:
beginning any installation procedure. Improper grounding can cause electrostatic discharge.

Hard drive option

Each server supports one internal SATA drive.
WARNING:
internal system components to cool before touching them.
To install the component:
Power down the server blade (on page 13).
1.
Remove the server blade (on page 14).
2.
Access the internal server components (on page 14).
3.
Remove the hard drive carrier.
4.
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent damage to electrical components, properly ground the server before
To reduce the risk of personal injury from hot surfaces, allow the drives and the
Hardware options installation 21