Processor Option - HP Apollo 4200 Gen9 User Manual

6. Do one of the following:
• If you intend to install the SSD module in an M.2 SSD enablement board located in the PCI riser
cage, make sure the board surface is accessible. Remove the PCI riser cage as needed.
• If you intend to install the SSD module in an M.2 SSD enablement board located in an onboard
expansion slot, disconnect the existing M.2 SSD SATA cable from the enablement board, and then
remove the enablement board.
7. Install the SSD module on the M.2 SSD enablement board.
8. Do one of the following:
• If removed, install the PCI riser cage.
• If removed, install the M.2 SSD enablement board.
9. Install the air baffle.
10. Install the access panel.
11. Install the server into the rack.
12. Power up the server.

Processor option

The server supports single-processor and dual-processor operations.
110 Processor option