System maintenance switch
Position
1
2
3
4
5
6
7
8
When the system maintenance switch position 6 is set to the On position, the system is prepared to erase
all system configuration settings from both CMOS and NVRAM.
CAUTION:
properly configure the server or data loss could occur.
Access components
CAUTION:
Failure to use the jackscrews to remove and install the server B assembly can cause the system
boards to fail.
Item
1
2
3
Function
iLO 2 security override
Configuration lock
Reserved
Reserved
Password disabled
Reset configuration
Reserved
Reserved
Clearing CMOS and/or NVRAM deletes configuration information. Be sure to
The jackscrews control the unseating and seating of critical system connectors.
Description
Jackscrew 1
Jackscrew 2
T-15 Torx wrench
Default
Off
Off
Off
Off
Off
Off
Off
Off
Component identification 11