APPENDIX
APPENDIX 8.
Please read the leveling instructions described below carefully.
If the printer is not installed level, image failures may occur or the life expectancy of the OPC
belt cartridge may be shortened.
Please do not install the printer as shown in the figures below.
Note:
If the printer is inclined at 1° as shown in the figures below, the printer is approximately 9mm
out of level from one side to the other.
i)
ii) There is something under the printer or something stuck to the printer base.
TO LEVEL THE PRINTER CORRECTLY
Printer is installed across two or more tables.
Level
1°
Fig. A- 29
Fig. A- 30
A-36