Transfer Roller 3; Register Roller - Brother HL-3450CN Service Manual

4.6.2

Transfer roller 3

(1) Lift the transfer roller 3 lock levers to release both ends of the roller.
(2) Pull up and remove the transfer roller 3.
4.6.3

Register roller

(1) Remove the roller fixing C rings from both ends of the roller.
(2) Remove the gear from the shaft (left hand side).
(3) Remove the plastic bushes at both ends.
(4) Remove the plastic bush from the frame while pressing down on the pressure roller to
release the pressure from the register roller.
(5) Remove the register roller.
Gear
C ring
Fig. 7-77
Plastic bush
Fig. 7-78
7-51
Transfer roller 3
Lock lever
Register roller
Plastic bush
Pressure roller
HL-3450CN SERVICE MANUAL
C ring