CHAPTER 7 DISASSEMBLY & RE-ASSEMBLY
4.1.17
Waste toner feeder (L)
NOTE:
The waste toner feeder (L) is composed of the plastic tube and auger spring gear unit.
(1) Remove the screw ST3x6 (1 pc.) holding the metal plate of the waste toner feeder.
(2) Pull out the waste toner feeder (L) from the main frame.
Metal plate
Waste toner feeder (L)
Fig. 7-26
CAUTION
Be sure to vacuum up waste toner remaining inside the plastic tube with a vacuum cleaner
before removing the plastic tube.
7-22