Brother HL-3450CN Service Manual page 142

Code No.
15 MISPRINT
15 MISPRINT
16-1 ALIGN FU UNIT
16 ALIGN
16-2 ALIGN FUSER CL ROLLER
16 ALIGN FUSER
16-3 ALIGN TONER CG
16 ALIGN
LCD Message
[*6][*4]
FU.UNIT [*4]
CL ROLLER [*4]
[*5]
TONER CG [*4]
5-17
Description of Message
x
The engine is idling.
x
The Power LED is lit.
[*6] The type of misprint error is
indicated as follows;
NOPQR: No PRREQ-N signal is
available.
PAPER: No paper is available in
the feeder while
executing the print
operation after receipt of
the print command.
MEDIA: While executing the print
process after receipt of
print command, the
media type of the feeder
is not consistent with the
specified media type.
Misprint occurred during
duplex printing.
x
This message can be cleared by
pressing the - button.
x
The engine is stopped.
x
The Power LED is lit.
x
The fusing unit is not installed.
Reconfirm the installation status of the
fusing unit.
x
This message will be automatically
cleared by opening & closing the
paper exit cover. The message can
also be cleared by pressing the -
button.
x
The engine is idling.
x
The Power LED is lit.
x
The fuser cleaner is not installed.
Reconfirm the installation status of the
fuser cleaner.
x
This message will be automatically
cleared by opening & closing the
paper exit cover. The message can
also be cleared by pressing the -
button.
x
The engine is ready to print.
x
The Power LED is lit.
[*5]: The color of the incorrectly installed
toner cartridge will be indicated as
follows;
Y: Yellow M: Magenta
C: Cyan K: Black
x
Reinstall the toner cartridge correctly.
x
This message will be automatically
cleared by opening & closing the front
cover.
HL-3450CN SERVICE MANUAL