Table of Contents
Advertisement
DMT-8 Ver 2.0 Supplement to the Owner's Manual
2. Press the EXECUTE/YES key again.
The letter "cH s t" on the display will blink, and you can now edit the value.
3. Use the JOG dial to select from "1-2", "3-4", "5-6", "7-8", and "s t".
4. Press the EXECUTE/YES key again.
The display in Step I will appear, and the setting is complete.
5. Press the STOP button or the EXIT/NO key to quit Setup mode.
Recording digitally an external device
1. Connect an optical cable to the DMT-8's DATA OUT and to the OPTICAL
IN connector on an external digital device (DAT or MD player).
If the external digital device has only coaxial connectors for digital input, use
an optical COP-1 (optical/coaxial converter).
2. Pressing the STORE key while holding down the HOLD/> key allows you
to select an output Program.
3. Assing an output track in "dG out" of Setup mode on the DMT-8.
If you select tracks "1-2", "3-4", "5-6", "7-8", the add number track will be
assigned to digital output R channel.
4. Start recording on the external digital device.
5. Press the PLAY button on the DMT-8 to start playing back data.
6. When recording is completed, press the STOP button on both the DMT-
8 and the digital device.
1
2
3
4
5
6
7
8
DATA OUT
DMT-8
22
L
R
OVER
0
3
6
9
SET UP
12
18
24
30
OPTICAL IN
Digital Equipment
Blink
Advertisement
Table of Contents
