Undo/Redo Of The Move & Paste Operation; Notes On Cut/Erase - Fostex DMT-8 Supplement Owner's Manual

Undo;/Reedo of the Mode & Paste function
You can use the Undo/Redo funcctions for the Move & Paste operation in
the same way as for the Copy & Paste operation.
The Undo/Redo functions are effective only while the DMT-8 is stopped.
They are not available in any other mode.
The Undo/Redo functions are not effective in the following situations;
[1] After new recording
[2] After new editing (such as copy & paste, move & paste, erase,
and cut)
[3] When the Auto Punch In point is passed during playback or
recording with Auto Punch In mode set to ON
[4] When you turn the power off and on

Notes on Cut/Erase

Follow the procedure in the main manual for the Cut/Erase function.
Also, follow the notes below:
The Cut/Erase function is effective only for the currently-selected Program.
Be sure to check the Program number before executing this function.
If you try to cut the data for a program in its entirety by storing the ABS 0
point at the Auto Punch In point, about 100ms of data may remain at the
beginning.
In this case, us the Erase function to erase the unnecessary part. (The
Erase function can erase data that was not deleted by the Cut function.)
DMT-8 Ver 2.0 Supplement to the Owner's Manual
13