Table of Contents
Advertisement
Basic Operation
Audio Control
TUNE
BLACK OUT
Setting the AUX Mode
You can input TV/video sound by connecting an
optional Ai-NET/RCA Interface cable (KCA-121B)
to this component.
1
Press and hold the INTLZ button for at least 2
seconds.
2
Press the f UP button repeatedly to select
"AUX" .
Each press of the f UP button changes the
modes as shown:
NOTE
If you press the DN g button the display scrolls in
reverse sequence.
→ FM-LE → REG → PTY31 → AMBER → DIM → SUB → BEEP → MUTE
D-OUT ← CLOSE ← DEMO ← AUX (AUX Mode Display Setting*) ← SCR ←
∗ Displayed after AUX-IN ON is set.
3
Press the TUNE button to toggle the mode
between AUX-IN ON and AUX-IN OFF.
NOTES
• The initial setting at the factory is AUX-IN OFF.
• You can set the AUX mode display by pressing the DN
g or f UP button after AUX-IN ON is set,
select the AUX mode display setting, and then press
the TUNE button.
4
Press and hold the INTLZ button for at least 2
seconds to return to the normal mode.
5
To adjust the volume, etc., first press the
SOURCE button and select the AUX mode, then
make the necessary adjustment.
→ TUNER → CD → AUX
NOTE
When AUX-IN ON is selected, a CD changer cannot be
used.
8
-EN
INTLZ/DISP
SOURCE
DN g
f UP
DHE
F/A.PROC
Blackout Mode On and Off
When the Blackout mode is turned on, the display
will turn off to reduce power consumption.
This additional power enhances the sound quality.
1
Press and hold the BLACK OUT button for at
least 2 seconds to start the blackout mode. By
doing so the display will be removed.
NOTE
If any button on the unit is pressed during the blackout
mode, the function will be displayed for 5 seconds to
show the operation before returning to Blackout mode.
To cancel the blackout mode, press and hold the
BLACK OUT button for at least 2 seconds.
Switching the Display Modes
1
Press the DISP (DISPLAY) button to select the
desired Display pattern mode.
Each press changes the display patterns.
Pattern
Description
1
Normal pattern (Upward)
Mode Display
2
(Keeps showing the present operation
over and over.)
3
Normal pattern (Rightward)
4
Demonstration Display
Scan Display
5
(Repeats from Pattern 1 to Pattern 4
for every 5 seconds endlessly.)
6
Mode Display
7
Display OFF
Preset buttons
(F1 through F6)
Advertisement
Table of Contents
