SETUP
CDE-W265BT
DIM.
/SOURCE
Rotary encoder
CDE-164BT
Rotary encoder
/SETUP
/ENTER
/SOURCE
Setting
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting,
etc., can be modified.
Use steps 1 to 5 to select one of the SETUP modes to modify.
See the applicable section below for details about the
selected SETUP item.
1
Press and hold YSETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select the desired item, and
then press ENTER.
*1
GENERAL DISPLAY TUNER SIRIUS XM
AUDIO
IPOD APP BLUETOOTH
(e.g. Select GENERAL)
GENERAL:
CLOCK MODE CLOCK ADJ
*5
INT MUTE PLAY MODE STAY ON DEMO
AUX NAME
MODE CLOCK MODE
DISPLAY:
ILLUMINATI DIMMER TEXTSCROLL SCROLLTYPE
ILLUMINATI
/SETUP
/ENTER
DIM.
6
*2
*3
AUDIO
*4
PWR CLOCK AUX SETUP
TUNER:
TUNER FREQ FM SET TUNER FREQ
IPOD:
IPOD LIST
APP:
ALPINE APP TTS VOLUME ALPINE APP
*1 Refer to "Sound Setting" on page 17.
*2 Refer to "SiriusXM Setting" on page 45.
*3 Refer to "Bluetooth SETUP" on page 31.
*4 Refer to "Setting Time" on page 10.
*5 Displayed only when AUX SETUP is set to ON.
3
Select an Item with the Rotary encoder, and then press
ENTER.
(e.g. Select AUX SETUP)
4
Turn the Rotary encoder to change the setting, and then
press ENTER.
(e.g. Select ON or OFF)
5
6
Press and hold YSETUP for at least 2 seconds to return
to normal mode.
Notes
• Press t to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
General Setting
GENERAL is selected on the setup main menu in step 2.
Setting the Clock Display (CLOCK MODE)
You can select the clock display type, 12-hour or 24-hour, depending on
your preference.
Setting item: CLOCK MODE
Setting contents:
12H (Initial setting) / 24H
Turning the Clock Display ON/OFF
Setting item: PWR CLOCK
Setting contents:
OFF / ON (Initial setting)
OFF:
The clock isn't displayed when the power is off.
ON:
The clock is displayed when the power is off.
Setting the AUX SETUP mode
You can input the audio of an external device, (such as a Portable audio
player) to the AUX connector of this unit.
Setting item: AUX SETUP
Setting contents:
OFF / ON (Initial setting)
OFF:
When set to OFF, AUX source cannot be selected.
ON:
Set to ON when a portable device is connected. If VSOURCE is
pressed and AUX is selected, the sound of the portable device is
input to the unit.
27
-EN