Operating the Copy Station
Rimage System
The Rimage System screen displays information about the system's state,
mode, and current and pending jobs.
Rimage System from the Main Menu.
1. Select
2. Select one of the following.
•
Bins and Media - refer to the instructions on page 16.
•
Devices - refer to the instructions on page 18.
•
Camera Utility - refer to the instructions on page 18.
2001809_D
Bins and Media
The Bins and Media screen allows you to check and reset the bins and
change the default bin configuration.
Change Bins
While the Copy Station is configured for optimal performance, under
some circumstances the bin configuration may need to be changed to
accommodate different discs. The bin configuration should only be done by
a system administrator.
•
For more information visit
rimage.com/support
To change the default bin configuration for all jobs:
Bins and Media from the Rimage System screen.
1. Select
The Bins and Media screen displays.
2. Select Change Bins.
16