Rimage 5400N Disc Copy Station User Manual page 24

Resolving Copy Station Errors
Several error messages could display during the copying process. Most
are easily resolved. If you cannot resolve an error, contact your system
administrator or Rimage Technical Support.
Mismatched Media Error
This media error can display if the wrong type of disc is loaded in the bins.
1. Make sure that Bins 1, 2 and 3 contain discs.
2. Make sure that the correct type of discs are in the correct bins. Refer to
the Load the Bins section on page 5 for correct bin configuration.
3. Select Retry.
4. Check the bin count. Refer to the
instructions.
2001809_D
Check Bins
section on 18 for
For more information visit
Clamping Error
A clamping error could display if the master disc is not sitting properly on
the printer tray.
1. Make sure that the disc is set in the indented portion of the printer tray.
2. Select Retry.
Copy Station Unavailable Error
The Copy Station could be unavailable because another job is already
running or a publishing job was submitted from a remote user. If you receive
this error, wait until the current job or jobs are complete, then submit your
copy job.
rimage.com/support
21