Maintaining The Copy Station; Overview; Cautionary Information; Maintain The Touch Screen Monitor - Rimage 5400N Disc Copy Station User Manual

Maintaining the Copy Station

This section provides maintenance information for the Rimage Copy Station.
Important! For optimum performance, keep the Copy Station in a clean,
dust-free environment.

Overview

Regular preventative maintenance of your system can help to ensure error-
free recordings and clean printed labels. Maintenance also involves cleaning
the system.
For information on autoloader and printer maintenance, refer to the Rimage
Professional 3400 and 5400N User Guide or Everest 600 User Guide that was
included with your autoloader.

Cautionary Information

Caution: To avoid damaging the Copy Station during maintenance:
n
• Never use oils, silicone, or other lubricants on any part of the system.
• Use only non-abrasive cleaners to wipe down the surfaces of your
system.
• Use only a damp cotton cloth to wipe off the touch screen.
• Never use cleaners to clean the embedded PC.
• Avoid pouring cleaners directly onto the autoloader. Instead, apply
the cleaner a clean, lint-free cloth.

Maintain the Touch Screen Monitor

When dust or fingerprints appear on the touch screen:
1. Wipe the screen with a cotton cloth dampened with water.
2. Dry any excess moisture from the screen with a dry cotton cloth.
2001809_D

Calibrate the Touch Screen Monitor

In some cases you may need to run the Rimage Copy Station Recovery Disc.
This process deletes all files and information stored on the system and loads
the system's default configuration. Calibrating the touch screen is part of this
process.
Important! Do not attempt to use this utility without permission from your
system administrator.
1. Touch and hold the Main Menu title at the top of the touch screen to
2. From the Windows Desktop, select Start > Programs > Touchkit >
3. Touch and hold the
4. Repeat Step 2 for all four corners. When all corners have been verified,
5. Select
For more information visit rimage.com/support
access the Windows Desktop on the Copy Station, .
4PtsCal to access the Calibration Utility the calibration screen displays:
until it stops blinking and you hear a beep.
The icon moves to the next corner.
the calibration starts. When it completes, the utility exits and the
desktop displays.
to start the Copy Station program.
20