Copy Master Discs; Copy One Master Disc - Rimage 5400N Disc Copy Station User Manual

Operating the Copy Station

Copy Master Discs

The Copy Station allows you to copy one or several master discs onto one or
more blank discs.

Copy One Master Disc

Copy One Master from the Main Menu. The Copy Setup
1. Select
screen displays.
2. Use the up and down arrows or the numeric keypad to select the
number of disc copies you want to create.
2001809_D
3. Select Start. The system prepares for disc copying. A notice displays
4. When the notice displays, follow the prompts to load the master disc.
The copying process begins.
Tips:
•
•
The master disc's label is photographed by the integrated camera. This
image is printed on each copy of the disc that is made. The master disc is
placed in Recorder 1.
When the data on the master disc has been read, the system places the disc
in the external bin. A blank disc is placed in the Recorder. After the content
has been recorded, the disc is placed on the printer tray and the label is
printed on the disc. As each copy completes, the new disc is placed in the
output bin.
For more information visit rimage.com/support
when the system is ready.
a. Open the front door.
b. Place the master disc on the open printer tray.
c. Close the front door.
Throughout the process, the job status displays on the touch screen.
Select Stop at any time to cancel the copying process.
9