Pause The System; Load The Discs; Unload The Discs - Rimage Professional 3400 User Manual

Rimage Professional 3400 and 5400N User Guide

Pause the System

You can pause the system to add discs to the carousel.
1. Open the front door. The operation pauses.
2. Close the front door. The operation resumes.

Load the Discs

You can load up to 50 discs in each input bin. Use the
procedure below to load discs in each bin.
1. Open the front door.
2. Press the rotate carousel button to rotate the carousel
and place a bin in position to load discs.
3. Remove any completed discs from the bin.
-
Important! Place the discs with the recording side
facing down.
Tip: Through the Rimage software, you may designate
bins 1 through 3 as input, output, reject, or a specific
media type.
4. Repeat steps 2 - 3 until the required bins are filled.
5. Close the front door.

Unload the Discs

1. Open the front door.
2. Press the rotate carousel button to rotate the carousel and place a bin in position to remove discs.
3. Remove the discs from the bin.
4. Repeat steps 2 - 3 until the required bins are empty.
5. Close the front door.
20 2001431_B