Required Hyphen And Required Space - Nakajima AE-740 Operation Manual

Required Hyphen and
lmEN-l
Required Space
This function is used to type a hyphen or space in the hot zone that
will not trigger an automatic return. It's useful ta type a
combination of words that you do not want to separated by
automatic return.
Hold down the Code key and press the key below the "HYPHEN"
label on the top row, at the position where you want a required
hyphen.
On the display, a symbol mark "'" appears representing a required
hyphen.
Hold down the Code key and press the Space bar at the position
where you want a required hyphen.
On the display, a symbol mark ",-" appears representing a required
space.
This function is used to type a hyphen that will be printed only
when it falls in the hot zone to temporarily divide a word at the
right margin.
Note:
A syllable hyphen is available when in STORE mode only.
Hold down the Code key and press the "H" key. A symbol mark
"H " appears on the display representing a syllable hyphen.
At the time of print, the syllable hyphen will be printed only when it
falls in the hot zone.lf you modify the file and hyphenated'word is
shifted out of the hot zone, the syllable hyphen is ignored and will
not be printed.
@.D
t-4*E
L-J
\-
Syllable Hyphen
@.8
2E