Nakajima AE-740 Operation Manual page 40

+
il
5) Type the longest word or number which is to be typed in the first
column, and press the Return key. No text is printed at this time.
"TAB TYPE FOR COL.02" appears on rhe display.
6) Repeat steps 4) and 5) to enter the tab type and the longesr enrry
for the second column.
7) Repeat entering the tab type and the longest entry for every
column.
when the entries for all columns have been completed, the
message "COMPLETED PRESS J " appears on the display.
Press the Return key to clear the message.
The typewriter automatically sets tabs for each column at the
calculated positions, so that you will get a table with
well-balanced appearance between margins.
Note:
To clear the column layout function during the operation, hold
down the Code key and press the "K" key. The message
"ERROR SEE ITEM 12" appears.
If the message "ERROR sEE ITEM 10" appears, it warns you
that the number of columns you enter in step 3) is too many to fit
between the margins.
If the message "ERROR sEE ITEM I I " appears, it warns you
that the total characters of the longest entries are too many to fit
between the margins.
$'
i .
,, "'
*
35