Nakajima AE-740 Operation Manual page 13

Inserting/Ej ectin g Paper
@.8
Inserting paper
I ) Adjust the paper guide on the paper support panel to the desired
position. The paper guide ensures consistent placement of your
paper.
2) Insert a sheet of paper behind the platen aligned with the paper
gui de .
3) Pull the paper bail lever toward you as far as it goes. The paper
is automatically inserted and stops at the position where you
have set by the top of form setting. See "Setting The Top of
Form" section which follows.
Note:
Pulling the paper bail lever halfway raises the paper bail away
from the platen.
4) To release and straighten the paper. pull the paper release lever
toward you.
5) Return the paper release lever and paper bail lever to their
normal positions.
Ejecting paper
Hold down the Code key and press the "E" key to automatically
eject paper.