Nakajima AE-740 Operation Manual page 54

@ @ @
(mtrs)
@.8
Some tips for edit mode
a) Move the cursor to scroll to any position in the file.
Press the Backspace key to move the cursor one space to the left.
Press the Express key to move the cursor ong space to the right.
Press the Relocation key to move the cursor to the end of the file.
Press the Code key + "8" key to move the cursor to the
beginning of the file.
To quickly move the cursor to a desired location in the middte of
the file, use the search and replace function. See "search and
Replace" section which follows.
b) In the edit mode, the column counter does not appear and the
carrier does not move. To represent the carrier movement, the
followin g symbols appear.
J Return
Tab
{
Index
I
Reverse index
c) At the position where you activate any function, a box mark " | "
appears to represent the function. The box mark alternately
flashes with the function name when you position the cursor
under the box mark. To cancel the function. delete the box mark.
I e LEFT MARGIN SET
*
I e+ RIGHT MARGIN SET *
I <-+ MARGIN RELEASE
I < - + T A B S E T *
| <-+ TAB CLEAR
I <-+ ALL TABS CLEARED
! <+ MOVE CARRIER TO XX
I <-+ INDENT
I (+ NEXT INDENT
I <-+ AUTO CENTER
I <+ RIGH T MA R GIN FL US H
; t+ DECIMAL TAB SET
*
I <-+ CENTER TAB SET
*
I t+ FLUSH RIGHT TAB SET X
| <-+ GROUP DECIMAL TAB
49