Margi - Nakajima AE-740 Operation Manual

Margins
Preset margins
When you first turn on the typewriter, the preset margins are used.
These settings provide you with standard one inch left and one inch
right margins for each pitch selection.
Left margin
Right margin
l0 pitch (PICA)
l0
12 pitch (ELITE) 12
15 pitch (MICRO)
15
PS pitch 12
The area of 5 spaces immediately before the right margin is called
the hot zone. As the carrier/cursor moves toward the end of a line
and enters the hot zone, a beep sounds. This beep warns you that the
right margin is approaching.
Setting a new margin
Note:
Before setting a new margin, make sure the display has been
cleared.
I ) Use the Space bar or Backspace key to position the carrier/cursor
at the position where you want to set a new margin.
To set a margin beyond either of the curent margins, move the
carrier/cursor to the current margin, press the Margin release
key, then continue moving the carrier/cursor to the desired
position.
2) Press the Left margin key to set the left margin.
or
Press Right margin key to set the right margin.
A beep sounds to signal that a new margin has been set. When .
you set new margins, current margins are automatically cleared.
Note:
You cannot set left and right margins that are less than one inch
apart.
75
90
I 1 3
90
@
@
(@)
(tr)
r3