Automatic Carrier Return; Required Hyphen And Required Space - Nakajima AE-710 Operation Manual

Automatic Carrier Return
ffi
T
This function automatically returns the carrier at the end of each
line without pressing the Return key.
l) Hold down the Code key and press the AUTO RETURN key. A
beep sounds to signal that the function has been activated.
2) Type text. When the first space or hyphen is typed after the
carrier enters the hot zone (the area of 5 spaces immediately
before the right margin), the carrier automatically retums to the
left margin on the next line.
Note:
(For the typewriter with the USA or Canada French keyboard)
If a hyphen or space is not typed in the hot zone, the carrier will
advance past the right margin.
3) To cancel the automatic carrier return function, hold down the
Code key and press the AUTO RETURN key again. Two beeps
sound.
Required Hyphen And Required Space
I TIYPHEN
I
D
This function is used to type a hyphen or space in the hot zone that
will not tngger the automatic carrier return. This is useful to type a
combination of words that you do not want to separated by
automatlc cuurler return.
Hold down the Code key and press the HYPHEN key at the
position where you want a required hyphen. A hyphen is pnnted but
the carrier does not return.
Hold down the Code key and press the Space bar at the position
where you want a required space. A space is made but the carrier
does not return.
l 9