Nakajima AE-740 Operation Manual page 21

Corrections on Paper
position carrier
T h e b 1 s t t , y p e w r i t e r
Your typewriter has an automatic conection memory. It remembers
the last 700 characters typed within the last l0lines and will correct
any or all of those characters. Characters typed outside the
correction memory can be easily corrected using the manual
correction.
Automatic character correction (correcting characters wlthln
the correction memory)
I ) Use the Index key or Reverse index key to position the print
point indicator on the line which contains the enor. The line
locator (red line) marked on the card holder should be line up
below the line. Do not use the platen knob for alignment.
2) Use the Backspace Key or Space bar to position the print point
indicator on the character to be corrected.
3) Press the Conection key. The character under the print point
indicator position is erased.
Hold down the Correction key to erase more characters to the
left.
4) Type the correct character(s),
5) Press the Relocation key, The print point indicator returns to one
space beyond the last character typed on the page.
Note:
When you correct the last character you typed, you do not need
to backspace to the character. Simply touch the Conection key
and the print point indicator will automatically backspace and
delete the character.
T h e
T h e
trl
b^st CVnewrit,er
I
tr
O T t E y p e w r i t e r
(tr)
s e C y p e w r i t e r ^
@
The be
l 6