Nakajima AE-740 Operation Manual page 71

+
@
ortr
tr
il
NOT FOUND PRESSJ
6
'7)
Type the new word(s) you want to replace. You can type a
maximum of l8 characters including spaces.
8) Press the Print key. The first occurrence of the word(s) appears
on the left side of the display.
9) Press the "Y" key or Return key to replace the word(s).
or
Press the "N" key to leave it unchanged and advance to the next
occurTence.
l0)Repeat step 9) for every occurrence of the word(s).
Wtten the last occurrence of the word(s) is found, the message
"NOT FOUND PRESS J " appears on the display. Press the
Return key to cancel the function.
Note:
If the word(s) entered at the "$=" proffipt are not found in the
file, the message "NOT FOUND PRESS J " appears on the
display. To retry the function, press the Print key to display the
"$=" prompt again and retype the word(s) to be searched for. To
cancel the function, press the Return key.
To cancel the function in the middle of the file, press the "C"
key. Two beeps sound to signal the function has been canceled.