Nakajima AE-740 Operation Manual page 23

position carrier
l l l c
r y p e w r l r e r
T h c h c i r \ / n F \ ^ r . i t e f
A
D A S J L
A
Manual correction (correcting characters outside the correction
memory)
I ) Use the Index key or Reverse index key to position the print
point indicator on the line which contains the error. The line
locator (red line) marked on the card holder should be line up
below the line. Do not use the platen knob for alignment.
'
2) Use the Backspace key or Space bar to position the print point
indicator one space to the right of the charhcter to be conected.
Note:
Use the micro up/micro down/micro back space for accurate
alignment. See "Micro UpiTr4icro Down/Jt4icro Space" in the
Typing Functions" chapter.
3) Press the Correction key. The print point indicator backspaces to
the character.
4) Press the character to be erased. The character is erased and the
print point indicator remains at that position.
5) Type the correct character(s).
i
r-;t
L-J
m h ^ h ^ ^ F
I l I E U g 5 L
A
L y p e w r i t e r
t 8
'-"-